Maintenance methods for frame spinning machines
1. The basic structure of frame spinning machines
The walking frame spinning machine is a fiber fabric production equipment with a soft and delicate fiber feel and low strength. Mainly composed of needle plate, lower comb, comb rod, walking frame, upper comb, needle cylinder, etc., the walking frame is the core component for controlling yarn.
2. Common faults of frame spinning machines
1. The rack is stuck or unable to move.
2. Move the frame above the yarn points or hang it.
3. The upper and lower parts of the walking frame are not properly tightened.
4. The transmission belt of the walking frame is loose or broken.
3. Maintenance methods for frame spinning machines
1. The rack is stuck or unable to move
If the rack is found to be stuck or not moving, you can first check if the needle plate, upper and lower comb rods, and comb needles are damaged or slipping. If any problems arise, they should be replaced or adjusted in a timely manner.
2. Move the frame to the yarn point or hang it up
If it is found that the frame has passed through yarn points or hung up, the bottom of the frame should be checked for any residual yarn heads, and the yarn should be checked for normal and not too rough.
3. Improper tightness of the upper and lower parts of the walking frame
If the tension between the upper and lower parts of the walking frame is not appropriate, the adjustment knob and polyurethane washer of the walking frame should be checked for damage. If there is any damage, it should be replaced promptly.
4. Loose or broken transmission belt of the walking frame
If the transmission belt of the walking frame is loose or broken, the walking frame should be removed and the transmission belt should be checked for wear, breakage, or looseness. If any problems arise, they should be replaced promptly.
4. Conclusion
The frame spinning machine is one of the commonly used equipment in the textile industry, but some malfunctions may also occur during use. This article introduces the basic structure, common faults, and maintenance methods of frame spinning machines, hoping to help readers solve maintenance problems of frame spinning machines.
The walking frame spinning machine is a fiber fabric production equipment with a soft and delicate fiber feel and low strength. Mainly composed of needle plate, lower comb, comb rod, walking frame, upper comb, needle cylinder, etc., the walking frame is the core component for controlling yarn.
2. Common faults of frame spinning machines
1. The rack is stuck or unable to move.
2. Move the frame above the yarn points or hang it.
3. The upper and lower parts of the walking frame are not properly tightened.
4. The transmission belt of the walking frame is loose or broken.
3. Maintenance methods for frame spinning machines
1. The rack is stuck or unable to move
If the rack is found to be stuck or not moving, you can first check if the needle plate, upper and lower comb rods, and comb needles are damaged or slipping. If any problems arise, they should be replaced or adjusted in a timely manner.
2. Move the frame to the yarn point or hang it up
If it is found that the frame has passed through yarn points or hung up, the bottom of the frame should be checked for any residual yarn heads, and the yarn should be checked for normal and not too rough.
3. Improper tightness of the upper and lower parts of the walking frame
If the tension between the upper and lower parts of the walking frame is not appropriate, the adjustment knob and polyurethane washer of the walking frame should be checked for damage. If there is any damage, it should be replaced promptly.
4. Loose or broken transmission belt of the walking frame
If the transmission belt of the walking frame is loose or broken, the walking frame should be removed and the transmission belt should be checked for wear, breakage, or looseness. If any problems arise, they should be replaced promptly.
4. Conclusion
The frame spinning machine is one of the commonly used equipment in the textile industry, but some malfunctions may also occur during use. This article introduces the basic structure, common faults, and maintenance methods of frame spinning machines, hoping to help readers solve maintenance problems of frame spinning machines.
